Wulf Mods Flat Mini 2.0 510 Thread Battery

The Second Generation Flat Mini

Enjoy the ultimate cartridge experience with the help of your own Wulf Mods Flat Mini 2.0 Variable Voltage Battery. The Wulf Mods Flat Mini 2.0 offers compatibility with 510 threaded cartridges of any size, a quick charging 400mAh battery, and a 10s preheat function to provide a solid foundation for all of your oily sessions.

Taking things to a whole new level, the Wulf Mods Flat Mini features incrementally adjustable voltage levels from 1.8 – 4.2v all with dedicated + – buttons for easy adjustment. This lets you tune your clouds exactly how you like them and get the perfect mix of flavor, potency, and satisfaction.

Add in a full sized screen loaded with session information like battery level, voltage setting, and puff counter – to make the Wulf Mods Flat Mini 2.0 the perfect choice for consistent cartridge cloud quality. Check out the 9 different colors including black-red spatter and shiny full-color to get more from your cartridges today!

How To Load A Wulf Mods Flat Mini 2.0

Kick off your Wulf Mods Flat Mini 2.0 sessions by first choosing a 510 threaded cartridge and gently twisting it into the 510 connection. The Wulf Mods Flat Mini 2.0 is compatible with cartridges of any size, so the sky is the limit when it comes to your sessions.

How To Use A Wulf Mods Flat Mini 2.0

To begin using your Wulf Mods Flat Mini 2.0 press the power button 5x in quick succession and watch as your screen powers up to display a Wulf logo.

Once on, press and hold the power button down while drawing from the mouthpiece of your cartridge to enjoy seamless cloud access. To stop hitting the cartridge, simply release the power button and it will return to standby mode.

After you’re done vaping, you can turn your Wulf Mods Flat Mini 2.0 off by pressing the power button an additional 5x in a row, a goodbye message will play on your screen to let you know the input has been received.

Voltage Adjustment On A Wulf Mods Flat Mini 2.0

The Wulf Mods Flat Mini 2.0 offers incremental voltage adjustment between 1.8 – 4.2v and can be adjusted via the dedicated + – buttons located on the side of the device. Each click will adjust your voltage by .1 and allows you to easily cycle through the available heating choices.

How To Activate Preheat Mode On A Wulf Mods Flat Mini 2.0

Craving an extra kick from your cartridge? Activate the Wulf Mods Flat Mini 2.0 preheat mode by pressing the power button 2x in a row. This will start a 10s countdown where your cartridge is slowly heated, afterwards you’ll be able to draw from your cartridge as normal, but with all the boosted flavors and intensity.

Reset The Puff Counter On Your Wulf Mods Flat Mini 2.0

Take your puff counter back to zero and give yourself a fresh restart on your Wulf Mods Flat Mini 2.0 by holding down both the power button and the – button at the same time. After a few seconds, your counter will reset and you’ll be all good to go.

Heads up – once the puff counter on your Wulf Mods Flat Mini 2.0 has been reset, there is no way to get your old count back, so make sure you’re ready for the refresh.

How to Charge A Wulf Mods Flat Mini 2.0

Keep your Wulf Mods Flat Mini 2.0 at 100% by making use of the type-C charging port located on the side of your device. Once plugged in, your Wulf Mods Flat Mini 2.0 screen will display a battery icon that slowly fills over time. Once fully charged, the screen will stop flashing.

The first time you charge your Wulf Mods Flat Mini 2.0 leave it plugged into the cable for a full 2 hours long. Every time after that never charge the Wulf Mods Flat Mini 2.0 for longer than 1 hour at a time.

Troubleshooting A Wulf Mods Flat Mini 2.0

The Wulf Mods Flat Mini 2.0 has the following troubleshooting warnings built into its design to let you know when something’s up.

• Low Battery Warning: When your Wulf Mods Flat Mini 2.0 is at 0% battery, a red light will flash 10x to let you know it’s time for a charge.
• Short Circuit Warning: If your Wulf Mods Flat Mini 2.0 is experiencing a short circuit, it will flash red 5x in a row. Stop using the device until this is gone.
• Open Circuit Warning: Should your Wulf Mods Flat Mini 2.0 flash a white light 3x in a row, this indicates an open circuit. Please swap out your cartridge and make sure the connection is correct.

How to Clean A Wulf Mods Flat Mini 2.0

In order to clean your Wulf Mods Flat Mini 2.0 first power off your device completely. Once off, remove the cartridge and set it somewhere safe. From here you can use a q-tip dampened with isopropyl alcohol to gently scrub the 510 threaded connection to ensure it’s 100% clean. Always make sure to leave plenty of time for your Flat Mini 2.0 to air day before attempting to use it again.

What’s Included:

• (1) Wulf Mods Flat Mini 2.0 Variable Voltage Battery

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge. Failure to follow these instructions could result in battery damage and frying of the internal system.