Wulf Mods Flat Plus 2.0 510 Thread Battery

Control Your Cartridges

Stop settling for restrictive sessions and take full control over your cartridges with the Wulf Mods Flat Plus 2.0 Variable Voltage Battery. The Wulf Flat Plus 2.0 represents a massive leap forward for the standard vape pen, upping the ante with an extra large 900mAh battery, precision variable voltage control from 1.8 – 4.2v, dedicated + – adjustment buttons, fiery 10s preheat mode, and lightning fast type-c charging capabilities.

Thanks to a compact 2” size and universal compatibility with cartridges of any size, you can seamlessly unleash your sessions whenever and however you want without restriction. This makes the Wulf Flat Plus 2.0 the ultimate choice for session versatility, all while maintaining a budget friendly affordable price that maximizes your value.

Enjoy faster heating times and longer battery life, all with more control over your vapor when you upgrade to the Wulf Flat Plus 2.0. Available now in a variety of 9 gorgeous color variants including purple-black spatter, full-color, and more.

How To Load A Cartridge On A Wulf Mods Flat Plus 2.0

The Wulf Mods Flat Plus 2.0 is compatible with any sized 510 threaded cartridge, letting you use any and all of your favorite brands. This universal compatibility is excellent for variety, letting you and your friends go hog wild during your sessions without needing to swap batteries.

To attach a cartridge to the Wulf Flat Plus 2.0 gently twist your cartridge into the threaded connection located at the top of the battery. Make sure that the connection is threaded correctly and aim for a snug, not overly wound level of tightness.

With the cartridge safely attached to the Wulf Flat Plus 2.0 you are now ready to power it on and get to seshing!

How To Use A Wulf Flat Plus 2.0

To use a Wulf Flat Plus 2.0 press the power button 5x to turn on the battery. When successfully input your screen will turn on and you’ll be able to switch between the various voltage settings to choose your desired setting.

Next press and hold down the power button while drawing from your mouthpiece to enjoy a steady steam of lush vapor. When you’ve had enough or after 15s (the safety cut off time) you can release the power button to stop heating and put your battery back to standby mode.

After you’ve finished your session, you can power off the Wulf Flat Plus 2.0 by pressing the power button an additional 5x.

Voltage Adjustment On A Wulf Flat Plus 2.0

To adjust voltage levels on the Wulf Flat Plus 2.0 use the dedicated + – buttons located right on the front face of the battery. With a wide range from 1.8 – 4.2v this lets you easily enjoy the full spectrum of oil experiences and meet the demands of your various cartridges directly.

When you’ve reached your chosen voltage simply stop pressing the + – buttons and it will lock in, letting you know it’s time to get ripping.

How To Activate Preheat Mode On A Wulf Mods Flat Plus 2.0

To activate the preheat mode on your Wulf Mods Flat Plus 2.0 press the power button 2x in a row. This will begin a 10s countdown where your cartridge is slowly warmed at 1.8v in order to prepare you for a more potent and fiery hit. After the 10s duration, you can use your Wulf Flat Plus 2.0 like normal and enjoy a super charged hit.

Reset The Puff Counter On Your Wulf Mods Flat Plus 2.0

Reset the puff counter on your Wulf Mods Flat Plus 2.0 by holding down both the power button and the “ – “ button on your battery. After a few seconds, you’ll see the puff counter on your screen reset back to zero. Once reset there is no going back, so make sure that you’re ready to wipe the slate clean before holding down the buttons.

How to Charge A Wulf Mods Flat Plus 2.0

To charge a Wulf Mods Flat Plus 2.0 make use of the type-c charging port located on the base of the battery. Once connected your screen will turn on and the battery level will flash to let you know the current charge. Once your Wulf Flat Plus 2.0 reaches 100% power make sure to promptly remove it from the charger in order to protect battery lifespan.

Troubleshooting A Wulf Mods Flat Plus 2.0

In order to keep yourself safe during your sessions and ensure proper function of your Wulf Flat Plus 2.0 there are several trouble shooting warnings to be aware of while vaping. 

• Low Battery Warning: A red light will flash 10x and your battery will switch off. This means you need to recharge your Flat Plus 2.0. 
• Short Circuit Warning: A red light will flash 5x and your battery will switch off. This means that your battery is having issues and you should cease using it until this subsides. 
• Open Circuit Warning: A white light will flash 3x. This means your cartridge isn’t connected correctly, reattach it or swap to a different cart. 

Keep these in the back of your mind or check back here if you ever encounter them and this way you’ll know exactly what your Flat Plus 2.0 is trying to tell you and can adjust your session accordingly.

How to Clean A Wulf Flat Plus 2.0

In order to clean the Wulf Flat Plus 2.0 first power off the battery. Never attempt to clean your vaporizer (or any vape for that matter) while the power is still on, as this can lead to issues with battery lifespan and function.

Once off, remove the 510 cartridge from the top. From here you can proceed by wiping down the exterior of your Flat Plus 2.0 while paying special attention to the button and threaded cartridge connection.

For any hard to remove stains, make use of an isopropyl alcohol dampened q-tip / swab in order to take care of things quickly and get back to 100%. When finished cleaning, always leave ample time for your Wulf Flat Plus 2.0 to dry completely before starting to use it again.

What’s Included: 

• (1) Wulf Mods Flat Plus 2.0 Variable Voltage Battery

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system.