Wulf Mods Hito Plus 510 Thread Battery

The Hito Plus Upgrade

Step up your cartridge enjoyment with the leveled up power of the Wulf Mods Hito Plus 510 Thread Battery! The Wulf Hito Plus expands upon the classic Wulf Hito with a super sized 500mAh battery and extra thick body providing a natural next step for your sessions. Features include a range of 3 voltages (2.8V, 3.2V, 3.6V), a 1.8v 10s pre-heat function, and of course universal compatibility with your cartridges of any size.

The Wulf Hito Plus includes a full range of quality of life upgrades including LED light indicators, fast USB-C charging, auto-shut-off after 1 hour of non-use, and a durable exterior that can handle even the toughest of sessions with ease. Combined with the small pocket-size and the Wulf Hito Plus provides the perfect catch all choice for complete vapor freedom.

Make sure your Wulf Hito Plus matches your vibes and look over the wide range of 9 unique color choices to make your pick. Start getting the best from your cartridges and enhance your vapor with the Wulf Hito Plus 510 Thread Battery now.

How To Load Your Cartridge Onto A Wulf Hito Plus

To load a cartridge onto your Wulf Hito Plus make use of the threaded attachment located on the top of your battery. Gently twist your cartridge into the threads until the two components are flush against each other. No need to go crazy, the goal here is for a snug fit, not over-tightness.

The Wulf Hito Plus fits 510 threaded cartridges of any size, allowing you to choose any of your various oils to get started with.

How To Use A Wulf Hito Plus Ultra Slim 510 Battery

To use a Wulf Hito Plus Ultra Slim 510 Battery press the power button five times in a row (5x) to activate your battery. This will cause your LED light around the power button to flash GREEN five times (5x) before switching to the color associated with your current voltage level.

With your battery powered on, you can press and hold the power button while drawing from your cartridge mouthpiece to enjoy a steady stream of vapor. When you’re done, simply release the power button and your Wulf Hito Plus will return to standby mode for one hour, before powering off.

When you’re done with your Wulf Hito Plus, you can turn the battery off by pressing the power button five times (5x) in a row. This will cause your LED light to flash RED five times in a row, before switching off. You can now safely travel with or store your Wulf Hito Plus.

Voltage Adjustment On A Wulf Hito Plus

To adjust the voltage level on your Wulf Hito Plus press the power button three times in a row (3x). This will cycle you through to the next available voltage level in line and swap up the LED color on your power button.

The color coding on the Wulf Hito Plus is as follows:

• Green: 2.8v
• Blue: 3.2v
• Red: 3.6v

Once you’ve reached your chosen voltage on the Wulf Hito Plus, you can release the power button and allow the setting to lock in. From here you can get back to using your battery as normal and enjoy vapor production at your new setting.

How To Activate Pre-Heat Mode On A Wulf Hito Plus

To activate pre-heat mode on your Wulf Hito Plus press the power button two times in a row (2x). This will begin a 10s warming period at 1.8v, after which you can use your battery as normal but with an extra boost of vapor volume and potency.

How to Charge A Wulf Hito Plus

To charge a Wulf Hito Plus make use of the USB-C port located on the side of the body. The first time you charge your Wulf Hito Plus make sure to leave it plugged in for a full two hours. After that first charge, never leave your battery charging for longer than one hour at a time.

When properly plugged in for charging your Wulf Hito Plus will display a RED LED light. Once your battery reaches 100%, the light will shut off. Make sure to always unplug your Wulf Hito Plus promptly to avoid battery issues.

Troubleshooting The Wulf Mods Wulf Hito Plus

The Wulf Hito Plus includes several trouble shooting warnings in order to keep you and your battery safe during sessions. 

• Low Battery Warning: Your LED light will flash red ten times (10x) and power off to indicate you need to charge your Wulf Hito Plus. 
• Short Circuit Warning: Your LED light will flash red five times (5x) and power to indicate your experiencing a short circuit issue, stop using the Wulf Hito Plus until this subsides. 
• Open Circuit Warning: Your LED light will flash white three times (3x) to indicate your circuit is open, reattach your cartridge to the Wulf Hito Plus or try a new one. 

Make sure to take care of any troubleshooting warnings immediately and never attempt to use your Wulf Hito Plus while experiencing a short circuit.

How to Clean The Wulf Hito Plus

For best performance you need to clean your Wulf Hito Plus every couple of weeks or when you notice any stickiness or grime. To clean your Wulf Hito Plus follow the steps below: 

1. Turn your Wulf Hito Plus battery off. 
2. Remove the cartridge from your Wulf Hito Plus. 
3. Use an isopropyl swab or q-tip to clean the battery threads.
4. Leave plenty of time for everything to dry. 
5. Return to using your Wulf Hito Plus

By taking the time to clean your Wulf Hito Plus you’ll be ensuring your flavor and vapor production always stays ripping at 100%. This way you get to enjoy the best clouds, for as long as possible, all with just a bit of maintenance.

What’s Included: 

• (1) Wulf Mods Hito Plus 510 Thread Battery

WARNING: Do not charge with a powerbank of 5V or higher. Do not charge in your car. Do not overcharge the battery. Failure to follow these instructions could result in battery damage and frying of the internal system.